Stainless Steel 316 Square Bar, ASTM-A276, 3/8" Thick, 3/8" Width, 36" Length

Stainless Steel 316 Square Bar, ASTM-A276, 3/8" Thick, 3/8" Width, 36" Length Reviews

Other Picture

Stainless Steel 316 Square Bar, ASTM-A276, 3/8" Thick, 3/8" Width, 36" Length Feature

• ASTM-A276
• Superior corrosion resistance.
• Widely used in the marine industry.
• High temperature Strength
• Low Temperature Toughness

Stainless Steel Square Bar Type 316 ASTM-A276 A slightly higher nickel and molybdenum content produces superior corrosion resistance. Welding characteristics are very good. Widely used in marine environments and in applications that requires exposure to acetic acid compounds, and other chemical corrodents. Stainless Steels are alloys of iron and carbon that contain between 12 percent and 30 percent Cr, plus other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Stainless Steels are wrought or cast and consist of several families that are named for their metallurgical structure. Stainless Steels are fabricated and welded by all common processes and are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Density is .29 lbs./in3. Formability is good, and cold working results in increased strength. This alloy is non-magnetic in the annealed condition, although it may become slightly magnetic after cold working. It can be hardened only by cold working, and not by heat treatment.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 31, 2011 16:07:10

Bunting Bearings ET0510 5/8" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar

Bunting Bearings ET0510 5/8" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Reviews

Other Picture

Bunting Bearings ET0510 5/8" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 30, 2011 19:19:08

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.75" Width, 72" Length

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.75" Width, 72" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.75" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 1" Width, 36" Length
• Aluminum 6063-T52 U-Channel, ASTM B221, 1/8" Thick, 1-1/4" Width, 1-1/4" Leg Length, 36" Length
• Aluminum 6063-T52 Round Rod, 0.75" OD, 36" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 1/8" Thick, 1/2" Width, 72" Length
• Aluminum 6061-T6511 Rectangular Tubing, 1"x2", 0.125" Wall, 36" Length

Detail Reviews

Jul 29, 2011 19:06:22

Aluminum 6061-T6511 Square Bar, 0.875" Thick, 0.875" Width, 36" Length

Aluminum 6061-T6511 Square Bar, 0.875" Thick, 0.875" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Square Bar, 0.875" Thick, 0.875" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Rectangular Bar, 0.1875" Thick, 0.625" Width, 36" Length
• Western Digital 2 TB Caviar Green SATA II Intellipower 64 MB Cache Bulk/OEM Desktop Hard Drive - WD20EARS
• StarTech 18in SATA to Right Angle SATA Serial ATA Cable (SATA18RA1)
• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Jul 28, 2011 17:55:07

Stainless Steel 303 Rectangular Bar, ASTM A582 , 1/8" Thick, 1/2" Width, 36" Length

Stainless Steel 303 Rectangular Bar, ASTM A582 , 1/8" Thick, 1/2" Width, 36" Length Reviews

Other Picture

Stainless Steel 303 Rectangular Bar, ASTM A582 , 1/8" Thick, 1/2" Width, 36" Length Feature

• ASTM-A582
• Corrosion Resistant
• Free Machining
• High temperature Strength
• Low Temperature Toughness

Stainless Steel Rectangular Bar Type 303 ASTM-A582 is a free-machining alloy with sulfur content that enhances its machinability. Typical applications include bolts, bushings, nuts, shafts, and parts produced on automatic screw machines. Stainless Steels are alloys of iron and carbon that contain between 12 percent and 30 percent Cr, plus other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Stainless Steels are wrought or cast and consist of several families that are named for their metallurgical structure. Stainless Steels are fabricated and welded by all common processes and are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Density is .29 lbs./in3. Formability is good, and cold working results in increased strength. This alloy is non-magnetic in the annealed condition, although it may become slightly magnetic after cold working. It can be hardened only by cold working, and not by heat treatment. Stainless Steel 18-8 denotes 18 percent chromium and 8 percent nickel. This generic designation Stainless Steel 18-8 includes Types 301, 302, 303, 304, and 305.

Visit Store Now !!

Detail Products

• Stainless Steel 303 Round Rod, Precision Centerless Ground, Precision, ASTM-A582, 5mm OD, 24" Length
• Sanyo Eneloop 4 Pack AA NiMH Pre-Charged Rechargeable Batteries
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)
• Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 1/8" Thick, 1/2" Width, 72" Length
• 18-8 Stainless Steel Socket Head Cap Screw, Hex Socket Drive, #1-72, 3/8" Length (Pack of 100)

Detail Reviews

Jul 27, 2011 17:57:15

Bunting Bearings ES0007 SOLID x 7/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar

Bunting Bearings ES0007 SOLID x 7/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar Reviews

Other Picture

Bunting Bearings ES0007 SOLID x 7/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 26, 2011 21:17:10

Aluminum 6061-T6511 Square Bar, 0.25" Thick, 0.25" Width, 72" Length

Aluminum 6061-T6511 Square Bar, 0.25" Thick, 0.25" Width, 72" Length Reviews

Other Picture

Aluminum 6061-T6511 Square Bar, 0.25" Thick, 0.25" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Rectangular Bar, 0.1875" Thick, 0.625" Width, 36" Length
• Western Digital 2 TB Caviar Green SATA II Intellipower 64 MB Cache Bulk/OEM Desktop Hard Drive - WD20EARS
• StarTech 18in SATA to Right Angle SATA Serial ATA Cable (SATA18RA1)
• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Jul 25, 2011 21:22:08

Aluminum 6061-T6511 Square Bar, 1.5" Thick, 1.5" Width, 36" Length

Aluminum 6061-T6511 Square Bar, 1.5" Thick, 1.5" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Square Bar, 1.5" Thick, 1.5" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Western Digital 2 TB Caviar Green SATA II Intellipower 64 MB Cache Bulk/OEM Desktop Hard Drive - WD20EARS
• StarTech 18in SATA to Right Angle SATA Serial ATA Cable (SATA18RA1)
• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Jul 24, 2011 02:29:06

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.5" Width, 36" Length

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.5" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 0.5" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.25" Thick, 4" Width, 36" Length
• Aluminum 6063-T52 U-Channel, 0.125" Thick, 1.75" Width, 0.75" Leg Length, 36" Length
• Aluminum 6063-T52 Round Rod, 0.75" OD, 36" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 1/8" Thick, 1/2" Width, 72" Length
• Aluminum 6061-T6511 Rectangular Tubing, 1"x2", 0.125" Wall, 36" Length

Detail Reviews

Jul 22, 2011 04:01:05

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1/2" Width, 72" Length

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1/2" Width, 72" Length Reviews

Other Picture

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1/2" Width, 72" Length Feature

• ASTM-B187
• 99.9 percent commercially pure
• Corrosion Resistant
• Easily Soldered
• Excellent electrical and thermal conductivity

Probably the first metal to be smelted from its ore, Copper derives its usefulness from a combination of desirable properties. It resists corrosion, provides outstanding electrical and thermal conductivity, and has good ductility with an attractive appearance. While its strength-to-weight ratio is relatively low, Copper is considered a heavy metal, with a density of .323 lbs/in3. The pure element is salmon pink, melts at 1981 F (1083 C), and polishes to a bright metallic luster. Used in alloyed form since at least 3500 BC, it is nonmagnetic, combines well with other metals, and is easy to fabricate and join. Copper and its alloys tend to work harden, and can be hot or cold worked for increased strength. Copper Rectangular Bar C110 ASTM-B187 is 99.9 percent commercially pure Copper and can be bent, riveted, drilled, soldered, brazed and welded to most any design requirement. Commonly used for electrical connections and ground straps.

Visit Store Now !!

Detail Products

• Copper C110 Rectangular Bar, ASTM-B187, 3/16" Thick, 1/2" Width, 72" Length

Detail Reviews

Jul 21, 2011 09:00:10

Bunting Bearings ET0511 5/8" Bore x 1 3/8" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar

Bunting Bearings ET0511 5/8" Bore x 1 3/8" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Reviews

Other Picture

Bunting Bearings ET0511 5/8" Bore x 1 3/8" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 14:47:28

Brass 360 Rectangular Bar, ASTM B16, 3/8" Thick, 2" Width, 72" Length

Brass 360 Rectangular Bar, ASTM B16, 3/8" Thick, 2" Width, 72" Length Reviews

Other Picture

Brass 360 Rectangular Bar, ASTM B16, 3/8" Thick, 2" Width, 72" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 10:23:34

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1" Width, 72" Length

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1" Width, 72" Length Reviews

Other Picture

Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1" Width, 72" Length Feature

• ASTM-B187
• 99.9 percent commercially pure
• Corrosion Resistant
• Easily Soldered
• Excellent electrical and thermal conductivity

Probably the first metal to be smelted from its ore, Copper derives its usefulness from a combination of desirable properties. It resists corrosion, provides outstanding electrical and thermal conductivity, and has good ductility with an attractive appearance. While its strength-to-weight ratio is relatively low, Copper is considered a heavy metal, with a density of .323 lbs/in3. The pure element is salmon pink, melts at 1981 F (1083 C), and polishes to a bright metallic luster. Used in alloyed form since at least 3500 BC, it is nonmagnetic, combines well with other metals, and is easy to fabricate and join. Copper and its alloys tend to work harden, and can be hot or cold worked for increased strength. Copper Rectangular Bar C110 ASTM-B187 is 99.9 percent commercially pure Copper and can be bent, riveted, drilled, soldered, brazed and welded to most any design requirement. Commonly used for electrical connections and ground straps.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 15, 2011 15:48:06