Copper 110 Rectangular Bar, ASTM B187, 1/4" Thick, 2" Width, 36" Length

Copper 110 Rectangular Bar, ASTM B187, 1/4" Thick, 2" Width, 36" Length Reviews

Other Picture

Copper 110 Rectangular Bar, ASTM B187, 1/4" Thick, 2" Width, 36" Length Feature

• ASTM-B187
• 99.9 percent commercially pure
• Corrosion Resistant
• Easily Soldered
• Excellent electrical and thermal conductivity

Probably the first metal to be smelted from its ore, Copper derives its usefulness from a combination of desirable properties. It resists corrosion, provides outstanding electrical and thermal conductivity, and has good ductility with an attractive appearance. While its strength-to-weight ratio is relatively low, Copper is considered a heavy metal, with a density of .323 lbs/in3. The pure element is salmon pink, melts at 1981 F (1083 C), and polishes to a bright metallic luster. Used in alloyed form since at least 3500 BC, it is nonmagnetic, combines well with other metals, and is easy to fabricate and join. Copper and its alloys tend to work harden, and can be hot or cold worked for increased strength. Copper Rectangular Bar C110 ASTM-B187 is 99.9 percent commercially pure Copper and can be bent, riveted, drilled, soldered, brazed and welded to most any design requirement. Commonly used for electrical connections and ground straps.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 13, 2011 12:15:10

Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 0.75" Width, 36" Length

Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 0.75" Width, 36" Length Reviews

Other Picture

Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 0.75" Width, 36" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 22 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Rectangular Bar, 0.1875" Thick, 0.75" Width, 36" Length
• Aluminum 6063-T52 U-Channel, 0.125" Thick, 1.75" Width, 1.75" Leg Length, 72" Length
• Polycarbonate Sheet, Clear, 0.125" Thick, 12" Width, 24" Length
• 3 Pc. Power Extension Socket Adaptor for Drills
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #12-24, 3/8" Length (Pack of 100)

Detail Reviews

Jul 11, 2011 23:41:10

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 3/4" Width, 36" Length

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 3/4" Width, 36" Length Reviews

Other Picture

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 3/4" Width, 36" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Visit Store Now !!

Detail Products

• Brass 360-H02 Round Rod, ASTM B16, 1/4" OD, 72" Length

Detail Reviews

Jul 07, 2011 14:01:11

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 2" Width, 24" Length

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 2" Width, 24" Length Reviews

Other Picture

Brass 360 Rectangular Bar, ASTM B16, 1/4" Thick, 2" Width, 24" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 05, 2011 06:12:03

Aluminum 6061-T6511 Square Bar, 0.75" Thick, 0.75" Width, 72" Length

Aluminum 6061-T6511 Square Bar, 0.75" Thick, 0.75" Width, 72" Length Reviews

Other Picture

Aluminum 6061-T6511 Square Bar, 0.75" Thick, 0.75" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Western Digital 2 TB Caviar Green SATA II Intellipower 64 MB Cache Bulk/OEM Desktop Hard Drive - WD20EARS
• StarTech 18in SATA to Right Angle SATA Serial ATA Cable (SATA18RA1)

Detail Reviews

Jul 03, 2011 22:30:17

Aluminum 6061-T6511 Rectangular Bar, 0.75" Thick, 1.25" Width, 36" Length

Aluminum 6061-T6511 Rectangular Bar, 0.75" Thick, 1.25" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.75" Thick, 1.25" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 1" Width, 36" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 3/8" Thick, 1/2" Width, 36" Length
• Aluminum 6063-T52 U-Channel, 0.125" Thick, 4" Width, 2" Leg Length, 36" Length
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Aluminum 6063-T5 Angle ASTM-B221, 1/8" Thickness, 1/2" x 1/2" Leg Length, 72" Length

Detail Reviews

Jul 03, 2011 01:53:07

Cold Rolled Steel 1018 Rectangular Bar, 3/16" Thick, 1/2" Width, 72" Length

Cold Rolled Steel 1018 Rectangular Bar, 3/16" Thick, 1/2" Width, 72" Length Reviews

Other Picture

Cold Rolled Steel 1018 Rectangular Bar, 3/16" Thick, 1/2" Width, 72" Length Feature

• Good general purpose light structural steel
• Easily welded and brazed.
• Mill Finish

Cold Rolled C1018 Steel is a high quality, low carbon, smooth finished mild steel has good machining characteristics. It is easy to weld and braze making it a great material for light structural, automotive, models or prototypes. The predominant elements in Carbon Steels are Iron and Carbon, of which Carbon content ranges from a few hundredths to just over 1 percent. (Low Carbon Steel - up to 0.30 percent; Medium Carbon Steel - up to 0.70 percent; High Carbon Steel - up to 1.3 percent). Carbon Steel in its various forms represents more than three-quarters of steel production. Carbon Steel is generally fine grain, fully killed (deoxidized) basic steel with no alloying agent. It may be classified as hot rolled or cold drawn, (cold rolled when referring to sheets) and is produced as bar, sheet, wire, tubing and structural shapes. Density is .28 lbs/in3.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 01, 2011 22:04:03