Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1" Width, 36" Length

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 0.75" Width, 36" Length
• Aluminum 6063-T52 U-Channel, 0.125" Thick, 1" Width, 1.5" Leg Length, 72" Length
• Aluminum 6061-T6511 Round Rod, 1" OD, 72" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM B221, 1-1/2" Thick, 2" Width, 12" Length
• Aluminum 6061-T6511 Square Bar, 1" Thick, 1" Width, 36" Length

Detail Reviews

Sep 29, 2011 01:23:13

Aluminum 6061-T4 Rectangular Bar, 0.25" Thick, 2.5" Width, 72" Length

Aluminum 6061-T4 Rectangular Bar, 0.25" Thick, 2.5" Width, 72" Length Reviews

Other Picture

Aluminum 6061-T4 Rectangular Bar, 0.25" Thick, 2.5" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 26 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 27, 2011 18:12:23

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length Reviews

Other Picture

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Visit Store Now !!

Detail Products

• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length
• Brass C260 Disc, ASTM-B16, 3/4" OD, 1/32" Thick
• Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1/2" Width, 36" Length
• Brass C360 Square Bar, ASTM-B16, 1/8" Thick, 1/8" Width, 72" Length
• Brass C260 Sheet, ASTM-B36, 0.032" Thick, 6" Width, 12" Length

Detail Reviews

Sep 26, 2011 20:20:19

Low Carbon Steel Rectangular Keystock, 1/2" Thick, 9/16" Width, 12" Length

Low Carbon Steel Rectangular Keystock, 1/2" Thick, 9/16" Width, 12" Length Reviews

Other Picture

Low Carbon Steel Rectangular Keystock, 1/2" Thick, 9/16" Width, 12" Length Feature

• High quality steel material
• Plain (unplated) finish

Precision Brand Keystock is used to provide driving torque between shafts and pulleys, gears, sprockets, etc. Used for new machinery, general maintenance, and shop repairs. It is a necessity in all applications where rotating power devices are used.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 25, 2011 17:43:24

Brass 360 Rectangular Bar, ASTM B16, 1/2" Thick, 2" Width, 36" Length

Brass 360 Rectangular Bar, ASTM B16, 1/2" Thick, 2" Width, 36" Length Reviews

Other Picture

Brass 360 Rectangular Bar, ASTM B16, 1/2" Thick, 2" Width, 36" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Visit Store Now !!

Detail Products

• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length
• Brass C260 Disc, ASTM-B16, 3/4" OD, 1/32" Thick
• Copper 110 Rectangular Bar, ASTM B187, 1/8" Thick, 1/2" Width, 36" Length
• Brass C360 Square Bar, ASTM-B16, 1/8" Thick, 1/8" Width, 72" Length
• Brass C260 Sheet, ASTM-B36, 0.032" Thick, 6" Width, 12" Length

Detail Reviews

Sep 23, 2011 19:18:37

Stainless Steel 303 Square Bar, ASTM-A582, 3/16" Thick, 3/16" Width, 36" Length

Stainless Steel 303 Square Bar, ASTM-A582, 3/16" Thick, 3/16" Width, 36" Length Reviews

Other Picture

Stainless Steel 303 Square Bar, ASTM-A582, 3/16" Thick, 3/16" Width, 36" Length Feature

• ASTM-A582
• Corrosion Resistant
• Free Machining
• High temperature Strength
• Low Temperature Toughness

Stainless Steel Square Bar Type 303 ASTM-A582 is a free-machining alloy with sulfur content that enhances its machinability. Typical applications include bolts, bushings, nuts, shafts, and parts produced on automatic screw machines. Stainless Steels are alloys of iron and carbon that contain between 12 percent and 30 percent Cr, plus other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Stainless Steels are wrought or cast and consist of several families that are named for their metallurgical structure. Stainless Steels are fabricated and welded by all common processes and are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. Density is .29 lbs./in3. Formability is good, and cold working results in increased strength. This alloy is non-magnetic in the annealed condition, although it may become slightly magnetic after cold working. It can be hardened only by cold working, and not by heat treatment. Stainless Steel 18-8 denotes 18 percent chromium and 8 percent nickel. This generic designation Stainless Steel 18-8 includes Types 301, 302, 303, 304, and 305.

Visit Store Now !!

Detail Products

• Stainless Steel 18-8 Square Keystock, ASTM-A681-94, 3/16" Thick, 3/16" Width, 12" Length
• Stainless Steel 303 Round Rod, ASTM-A582, 1/4" OD, 72" Length
• Stainless Steel 303 Hexagonal Bar, ASTM A582, 1/4" Flat to Flat, 36" Length
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #10-16, 1/2" Length (Pack of 100)
• Stainless Steel 303 Round Rod, Precision Centerless Ground, Precision, ASTM-A582, 5mm OD, 24" Length

Detail Reviews

Sep 22, 2011 23:43:04

Aluminum 6063-T42 Square Bar, 0.625" Thick, 0.625" Width, 72" Length

Aluminum 6063-T42 Square Bar, 0.625" Thick, 0.625" Width, 72" Length Reviews

Other Picture

Aluminum 6063-T42 Square Bar, 0.625" Thick, 0.625" Width, 72" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 18 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 19, 2011 19:14:49

Aluminum 6061-T6511 Square Bar, 1.125" Thick, 1.125" Width, 72" Length

Aluminum 6061-T6511 Square Bar, 1.125" Thick, 1.125" Width, 72" Length Reviews

Other Picture

Aluminum 6061-T6511 Square Bar, 1.125" Thick, 1.125" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.5" Width, 36" Length
• Aluminum 6061-T6511 Round Rod, 1" OD, 72" Length
• 507 Mechanical Movements: Mechanisms and Devices (Dover Science Books)
• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length

Detail Reviews

Sep 18, 2011 21:41:07

Starrett D2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1" Width, 1/2" Thick, 18" Length

Starrett D2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1" Width, 1/2" Thick, 18" Length Reviews

Other Picture

Starrett D2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1" Width, 1/2" Thick, 18" Length Feature

• Stock is dimensionally stable-use it for the most intricate work
• Deep hardening characteristics and fine grain structure
• Machines freely-fully spheroidized, annealed
• Full length identification-eliminates confusion with other steels
• The Starrett Company uses its own ground flat stock and die stock for many of its fine precision tool parts

Furnished in 18" and 36" lengths, ground straight and parallel. It is recommended that stock be heated uniformly to 1450 degree-1500 degree F and quenched in oil Temperature of the quenching oil should be 120 degree -140 degree F for best results Do not quench in water because this is an oil hardening steel. For maximum toughness, a tempering time of one hour at temperature is recommended Use chart for selecting desired Rockwell C hardness and corresponding tempering temperature The following table may also be used as a guide depending on type of work. Cutting Tools: 300 degree-350 degree F (Light Straw). Solid Punches and Dies: 400 degree-450 degree F (Straw). Spring Temper: 750 degree-800 degree F (Blue).

Visit Store Now !!

Detail Products

Detail Reviews

Sep 17, 2011 11:27:06

Aluminum 6061 Rectangular Bar, 1" Thick, 1/4" Width, 72" Length

Aluminum 6061 Rectangular Bar, 1" Thick, 1/4" Width, 72" Length Reviews

Other Picture

Aluminum 6061 Rectangular Bar, 1" Thick, 1/4" Width, 72" Length Feature

• Provides excellent joining characteristics and good acceptance of applied coatings
• Combines relatively high strength, good workability and high resistance to corrosion
• Excellent welding capabilities

Admired for its lightweight, high strength to weight ratio, high corrosion resistance, high thermal and electrical conductivity, and ease of machinability, aluminum is often referred to as the wonder metal and is considered the ideal material choice for a variety of today's critical applications.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 11:44:10

Aluminum 6061-T6511 Rectangular Bar, 0.25" Thick, 3" Width, 36" Length

Aluminum 6061-T6511 Rectangular Bar, 0.25" Thick, 3" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.25" Thick, 3" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.125" Thick, 3.5" Width, 72" Length
• Aluminum 6061-T6511 Round Rod, 1" OD, 72" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM B221, 1-1/2" Thick, 4" Width, 12" Length
• Aluminum 6063-T52 U-Channel, ASTM B221, 1/8" Thick, 1-1/4" Width, 1-1/4" Leg Length, 36" Length
• Aluminum 6061-T6511 Square Bar, 0.25" Thick, 0.25" Width, 36" Length

Detail Reviews

Sep 15, 2011 12:06:18

Aluminum 6063-T52 Rectangular Bar, 0.125" Thick, 6" Width, 36" Length

Aluminum 6063-T52 Rectangular Bar, 0.125" Thick, 6" Width, 36" Length Reviews

Other Picture

Aluminum 6063-T52 Rectangular Bar, 0.125" Thick, 6" Width, 36" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 22 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

Visit Store Now !!

Detail Products

• Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.5" Width, 36" Length
• Aluminum 6063-T52 U-Channel, ASTM B221, 1/8" Thick, 2" Width, 2" Leg Length, 72" Length
• Aluminum 5052-H32 Sheet, 1/8" Thick, 12" Width, 12" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM B221, 1-1/2" Thick, 4" Width, 12" Length
• Aluminum 6061-T6 Square Bar, ASTM-B211, 3/4" Thick, 3/4" Width, 72" Length

Detail Reviews

Sep 14, 2011 11:50:05

SteelWorks N258244 1x1/4x8ft Alum Flat

SteelWorks N258244 1x1/4x8ft Alum Flat Reviews

Other Picture

SteelWorks N258244 1x1/4x8ft Alum Flat Feature

• Steelworks/ Boltmaster #11327 1/4x1x96 Flat Aluminum Bar
• STEELWORKS/BOLTMASTER

Hot rolled steel. Designed for commercial, industrial, and residential applications. Excellent forming and welding characteristics. Mill finish. 1/4" thickness. National catalog model No. 4202C.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 04:41:12